Table of Contents
- What a Switch 2 System Transfer Actually Moves
- Linking Nintendo Accounts before you start
- eShop purchases and redownloading your library
- Why System Update 23.5.0 is mandatory
- Before You Start: The Five-Minute Pre-Transfer Audit
- Confirm your Nintendo Switch Online status
- Build a cloud-save eligibility list
- Transfer duration and what slows it down
- Method 1: Local Transfer (Recommended If You Keep Both Consoles)
- Hardware and network prerequisites
- The all-or-nothing user rule
- What stays on your original Switch
- Method 2: Server Transfer (The Trade-In Route)
- How the upload package works
- The one-year download deadline
- Why the upload wipes your old Switch
- Method 3: microSD Express and Storage Migration
- Why your old microSD card will not work
- Choosing a microSD Express card in 2026
- Moving games between internal storage and the card
- Games That Need Manual Save Migration
- Animal Crossing: New Horizons and the Island Transfer Tool
- Pokémon and Splatoon: no cloud safety net
- Switch 2 Edition upgrades are one-way
- Troubleshooting a Failed or Skipped Transfer
- Transfer stalls or disconnects
- You skipped the setup transfer
- Missing screenshots and videos
- What To Do With Your Original Switch Afterwards
- Keeping it as a second console
- Wiping it safely before resale
- Frequently Asked Questions
- Limitations, Risks and What This Guide Cannot Promise
- Conclusion
- References
Key Takeaways
>
- The full system transfer runs only during Switch 2 initial setup, so skipping it means factory resetting the Switch 2 to try again.
- Local transfer is the safest route because it keeps your original Switch intact, but both consoles must run System Update 23.5.0 and sit on AC power.
- Server transfer exists for trade-ins, and it automatically factory-resets your original Switch while holding your data for up to one year.
- Your old standard microSD card will not run Switch 2 games; the console requires microSD Express alongside its 256 GB internal storage.
- A full transfer takes roughly 60 minutes, and Animal Crossing, Pokémon and Splatoon need manual handling outside the standard prompts.
The Zelda: Ocarina of Time Switch 2 console bundle triggered a migration surge through November 2026, which is why searches for how to transfer data from switch to switch 2 hit their 2026 peak this month. One rule matters more than every other instruction in this guide: the full system transfer runs only during the Switch 2’s initial setup. Skip it, start playing, and the only route back is a factory reset of your brand-new console.
The rules also tightened this month. Nintendo pushed System Update 23.5.0 to both the original Switch and the Switch 2 on 9 and 10 November 2026, and the local transfer handshake will not initiate on older firmware. Consequently the version number on each console is not a nice-to-have detail — it is a gate that stops the process before it starts.
This guide covers the three routes available as of 21 November 2026: local transfer, server transfer, and microSD Express storage migration. It was executed on retail hardware running 23.5.0, with a measured end-to-end time of roughly 60 minutes. For firmware news beyond this guide, see TrueOrGame’s latest Nintendo Switch 2 coverage.
About this guide: Written and tested by the TrueOrGame hardware desk on retail Nintendo Switch and Switch 2 units running System Update 23.5.0 in November 2026. We separate confirmed Nintendo behaviour from community-reported claims throughout, an editorial standard informed by verification practices documented by the Nieman Journalism Lab at Harvard University.
TrueOrGame – Video Game News, Leaks, Reviews & Guides
Transparency: TrueOrGame purchased the hardware used for this test. No manufacturer reviewed, funded or approved this article before publication. Where we have not tested something — a specific third-party card, an expired transfer package — we say so in the limitations section rather than filling the gap with a guess.
What a Switch 2 System Transfer Actually Moves
A Switch 2 system transfer copies the entire user layer of your console — user profiles, linked Nintendo Accounts, save data, eShop purchase entitlements, screenshots and video captures — from the original Switch to the new hardware in a single operation that runs during initial setup. It moves your account, not your installed software.
That distinction drives everything that follows. Because the transfer operates at account level rather than game level, eShop purchases arrive as entitlements attached to your Nintendo Account, which means the games themselves must be redownloaded from scratch on the Switch 2. Nintendo’s own support documentation frames the operation the same way: the system moves records and user data, not multi-gigabyte game installs.
What stays behind is equally important. Installed game files on your old standard microSD card do not travel, and Switch 2 Edition upgrade packs are separate downloads that the transfer never touches. Readers who expect their 400 GB library to appear on the new console within the hour will be disappointed — the hour buys you your identity and your saves, not your downloads.
What a Switch 2 system transfer moves
5 Best Video Games About Rebuilding After Losing Everything
- User profiles and their settings
- Linked Nintendo Accounts
- Save data for supported titles
- eShop purchase entitlements (games redownload, not copy)
- Screenshots and video captures
- Friend lists and play activity
- Not included: installed game files on a standard microSD card
Linking Nintendo Accounts before you start
A user profile that is not linked to a Nintendo Account is relocated rather than duplicated, which means it disappears from the original Switch the moment the transfer completes. Linked profiles behave differently because the account server holds a record of them; an unlinked local profile exists in exactly one place at a time, so the system has no choice but to move it.
Therefore link every profile before you touch the Switch 2. Open System Settings > Users on the original console, select each user in turn, and complete the Nintendo Account link. On a shared family console this is the single step most likely to cause an argument later, driven by the fact that a sibling’s unlinked profile vanishes without warning.
eShop purchases and redownloading your library
Purchase rights follow your Nintendo Account, not the hardware, which is why your library reappears in the eShop’s Redownload menu immediately after the transfer finishes. The files themselves do not. A library of fifty digital titles therefore means hours of downloading after the 60-minute transfer has already completed, and that download time depends entirely on your broadband.
Queue the downloads overnight with the Switch 2 docked and connected by wired Ethernet. Wired throughput removes the wireless variability that stretches large installs, and the console will continue downloading in sleep mode, so the queue clears while you are not waiting on it.
Why System Update 23.5.0 is mandatory
Nintendo shipped System Update 23.5.0 to both consoles on 9 and 10 November 2026, and the local system transfer handshake will not initiate on older firmware. Consequently both consoles must be updated before you begin Switch 2 setup — not during it, because the setup flow checks versions at the point of the transfer prompt and sends you back if either side is behind.
The same update added accessibility configuration to the Switch 2’s first-time setup, which matters because migration is a first-run task performed under time pressure. Guidance published by Digital.gov, the General Services Administration’s digital experience resource, argues that accessible flows matter most at the points where users cannot defer a decision — and a one-shot setup transfer is exactly that kind of point.
Before You Start: The Five-Minute Pre-Transfer Audit
Most failed attempts at how to transfer data from switch to switch 2 trace back to three preventable causes: an expired Nintendo Switch Online subscription, a console still running pre-23.5.0 firmware, and unlinked local profiles. Each one is fixable in under two minutes before setup, and each one is expensive to fix afterwards.
On retail hardware running 23.5.0, the operation took roughly 60 minutes end to end. The data handshake itself is not what consumes that hour — the bulk of the time goes to auditing accounts and syncing cloud backups before the transfer proper begins, which is why a console with four profiles and a large screenshot album runs longer than a single-user console with a 300 GB game library.
Five minutes of preparation is worth it because a mid-transfer failure is not a soft failure. Recovering a partially configured Switch 2 means a factory reset and a second run through initial setup, therefore prevention costs less than recovery by a wide margin.
Pre-transfer checklist
- Update both consoles to System Update 23.5.0 (System Settings > System > System Update)
- Confirm your Nintendo Switch Online subscription is active and has synced
- Link every user profile on the original Switch to a Nintendo Account
- Manually sync cloud saves for every supported game
- List the games that do not support Save Data Cloud and plan manual handling
- Copy screenshots and videos you cannot afford to lose to a PC or phone
- Connect both consoles to AC power and the same stable network
- Buy and insert a microSD Express card if your library exceeds 256 GB
Confirm your Nintendo Switch Online status
Nintendo Switch Online is not required for the system transfer itself, but it is required for Save Data Cloud — and Save Data Cloud is your only backup if the transfer fails. That asymmetry is the whole argument for renewing before you migrate: the subscription does not enable the transfer, it enables the recovery.
An expired subscription means cloud saves are retained for a limited grace window and then purged from Nintendo’s servers. Consequently a lapsed NSO account combined with a failed transfer leaves you with no copy of your progress anywhere.
Build a cloud-save eligibility list
Titles with tradeable or competitively significant economies are excluded from Save Data Cloud, because cloud restore would allow players to duplicate items, currency or Pokémon by rolling a save backwards. That single design decision explains why Pokémon, Splatoon and Animal Crossing: New Horizons all require manual routes rather than the standard prompt.
Check each game individually rather than assuming. Open System Settings > Data Management > Save Data Cloud and look for titles flagged as unsupported — that flagged list is your manual-handling checklist, and building it takes under two minutes on most consoles.
Transfer duration and what slows it down
Expect approximately 60 minutes on retail hardware running 23.5.0. Duration scales with the number of user profiles and the volume of captured media, not with the size of your game library, because entitlements move as licence records measured in kilobytes while screenshots and videos move as actual files measured in gigabytes.
The practical consequence is counterintuitive: a four-user console with 8,000 screenshots takes longer than a single-user console with every first-party Switch game installed. If you want a faster transfer, offload your album to a PC first.
Method 1: Local Transfer (Recommended If You Keep Both Consoles)
If you still own both consoles, local transfer is the correct approach to how to transfer data from switch to switch 2, because it moves everything in one pass and does not factory-reset the original hardware. Nintendo designed it as the default route, and the broader feature set reflects that — it carries profiles, accounts, saves, entitlements and media together.
Mechanically, the two consoles negotiate over local wireless while both remain connected to the internet for account verification. That dual requirement is why physical proximity and mains power are hard prerequisites rather than suggestions: the handshake needs a short, clean wireless link, and the verification needs an uninterrupted session on both ends.
The confirmed outcome for the old console is that it survives. A local transfer does not wipe your original Switch — but specific categories of data are relocated rather than copied, and those exceptions are covered in the subsections below.
Local transfer, step by step
- Update both consoles to 23.5.0 and plug both into AC adapters
- Power on the Switch 2 and begin initial setup; select language, region and Wi-Fi
- At the transfer prompt, choose to transfer data from a Nintendo Switch system
- On the Switch 2, select the local transfer option (both consoles present)
- On the original Switch, open System Settings > System > System Transfer to Nintendo Switch 2
- Place the consoles within a metre of each other and confirm on both screens
- Select the source console on the Switch 2 and begin the transfer
- Leave both consoles untouched and awake for roughly 60 minutes
- When prompted, insert your microSD Express card
- After completion, redownload your eShop library from Nintendo eShop > Redownload
Hardware and network prerequisites
Both consoles must sit on AC power, because a battery cut-off mid-transfer risks corrupting the package in flight and forces a restart from the Switch 2 setup screen. Both must be online, because the system verifies your Nintendo Account against Nintendo’s servers while the local transfer runs — an offline console fails verification and aborts.
Proximity is required by the local wireless handshake, so keep the units within about a metre with nothing metallic between them. Firmware 23.5.0 on both sides is the final gate: the handshake does not initiate across mismatched versions, which means an unupdated original Switch stops the process at step five regardless of everything else being correct.
The all-or-nothing user rule
No, you cannot move a single profile and leave the rest behind. Nintendo’s system transfer requires that every user on the source console travels together, consequently a shared family console migrates as one unit and the remaining household members lose their profiles from the original hardware.
That rule catches people out on consoles bought as family devices. If only one player needs their progress moved, the correct tool is per-game save data transfer, which is a separate and much narrower operation that targets an individual title’s save file. Confusing the two is the most common planning error we see, because the menu language around both features is similar.
What stays on your original Switch
A local transfer does not factory-reset the original Switch. Early 2025 rumours claimed otherwise, and those claims were wrong — the console remains functional, signed out of the migrated profiles but otherwise intact and still receiving its own system updates.
Two categories of data are the exception, and both are permanent. Saves for games that do not support Save Data Cloud are relocated to the Switch 2 and deleted from the old console, and profiles never linked to a Nintendo Account move the same way. The effect is that your original Switch stops being a usable backup the instant the transfer completes, even though it still turns on and plays cartridges.
Method 2: Server Transfer (The Trade-In Route)
Server transfer is how to transfer data from switch to switch 2 when you must sell or trade in the original console before the new one arrives. Nintendo introduced it specifically for that sequence, uploading a complete package of your console’s data to its servers so you can retrieve it later during Switch 2 setup.
The upload is also irreversible, and that has to be said in the same breath as the benefit. Completing a server transfer automatically factory-resets the original Switch and wipes all local data, according to Nintendo’s system transfer documentation — so verify every screenshot and every cloud save before you start, not after.
Nintendo built this route because trade-in credit funds a large share of console upgrades. A buyer who needs the cash from their old Switch cannot hold both devices simultaneously, therefore the local transfer route was structurally unavailable to them and the data would simply have been lost.
Server transfer, step by step
- Update the original Switch to System Update 23.5.0
- Sync all eligible cloud saves and copy irreplaceable screenshots to a PC
- Open System Settings > System > System Transfer to Nintendo Switch 2
- Select the option to upload data to Nintendo’s servers
- Confirm the warning that the console will be factory reset on completion
- Wait for the upload to finish and note the displayed download deadline
- Trade in or sell the now-wiped original Switch
- During Switch 2 initial setup, choose to download the transfer package and sign in
Warning: irreversible actions
- The upload factory-resets your original Switch automatically; there is no undo
- The package expires at the displayed download deadline of up to one year
- Only one transfer package can be held per console at a time
- An expired package cannot be recovered by Nintendo support
How the upload package works
The console bundles profiles, save data, account links and captured media into a single package and sends it to Nintendo’s servers. Because the operation is an upload rather than a device-to-device copy, its duration depends on your broadband upstream speed rather than on local hardware — and most domestic connections are far slower upstream than down, which means this route typically takes longer than the 60-minute local transfer.
Start it on a wired connection if your dock allows, and do not interrupt it. The reset only fires on completion, so a failed upload leaves the console intact, but a half-uploaded package is of no use to anyone.
The one-year download deadline
Nintendo displays a download deadline of up to one year at the moment the upload completes. That screen is the only record you will have, because the console that generated it is about to be wiped and sold.
Photograph it. Write the date in your phone calendar with a reminder a month ahead. An expired package cannot be restored by Nintendo support, which makes this the one step in the entire process where a thirty-second habit protects years of save data.
Why the upload wipes your old Switch
The reset prevents a single data set from existing in two playable places at once. If the original Switch kept its saves while an identical copy sat on Nintendo’s servers, a trade-in buyer and the original owner could both hold the same save-based items, enabling duplication across the ecosystem.
Therefore the wipe is a design requirement of the trade-in route rather than a bug or an oversight. Treating it as something Nintendo might soften in a future update is a mistake — the anti-duplication logic that governs cloud saves governs this too.
Method 3: microSD Express and Storage Migration
Your old standard microSD card will not run Switch 2 games. The Switch 2 requires the microSD Express format, and slotting a legacy card into the new console will not make your existing installs playable, regardless of the card’s capacity or speed class.
The engineering reason is the bus, not the brand. microSD Express routes data over a PCIe/NVMe interface rather than the legacy UHS-I bus, which is what allows game load times approaching internal storage performance. Technical certification frameworks published by the IEEE Standards Association illustrate why consumer storage formats are defined at the interface level: a card that cannot physically reach the mandated throughput cannot be made compliant by firmware. A standard microSD therefore fails the console’s requirement by construction.
Capacity compounds the problem. The Switch 2 ships with 256 GB of internal storage, and system files plus the large Switch 2 Edition upgrade patches consume a meaningful share of that before you install anything. Tech analysts consistently advise buying a dedicated Express card before the transfer rather than after, because the setup flow prompts for the card and inserting it then saves you a second migration pass later. Our gaming setup guides cover dock and storage configuration in more depth.
| Attribute | Standard microSD (UHS-I) | microSD Express |
|---|---|---|
| Interface bus | Legacy UHS-I | PCIe/NVMe |
| Typical sequential read | Not stated | Not stated |
| Works for Switch 2 games | No | Yes |
| Works for Switch 2 screenshots and videos | Not stated | Yes |
| Recognised by original Switch | Yes | Not stated |
| Relative cost per GB | Lower | Higher |
What to check when buying a microSD Express card in 2026
- The microSD Express logo printed on the card, not just a fast UHS-II rating
- Capacity of at least 256 GB if you hold more than twenty digital titles
- A named-brand controller with a stated warranty period
- Purchase from an authorised retailer, because counterfeit Express cards appeared through 2026
- Format the card in the Switch 2 itself before copying anything to it
Why your old microSD card will not work
No — your existing card cannot store or run Switch 2 games. The cause is architectural: the Switch 2 reads expandable storage over a PCIe/NVMe path, and a UHS-I card has no route onto that bus, so the console will not accept it as game storage.
There is one useful partial exception. The old card remains fully readable on the original Switch, and it can be mounted in a PC card reader to retrieve screenshots and video captures. Treat it as an archive rather than as a dead component, particularly because media stored on it does not travel with a system transfer.
Choosing a microSD Express card in 2026
Buy Express-branded, 256 GB or larger, from an authorised seller. The microSD Express specification is defined by the SD Association, and only cards carrying the Express logo meet it — a UHS-II card with impressive marketing numbers still uses the wrong bus and will not work for games.
Counterfeit and mislabelled listings appeared through 2026, which is why the retailer matters as much as the brand. The Federal Trade Commission publishes consumer guidance on misleading product claims in digital marketplaces, and the practical defence is the same one it recommends generally: buy from authorised channels where a return path exists.
Moving games between internal storage and the card
Relocate archived software through System Settings > Data Management, which lets you move installed titles between internal storage and the Express card without redownloading them. This becomes necessary quickly, because 256 GB of internal space absorbs system files and upgrade patches before your library competes for what remains.
The Switch 2 prompts for an Express card during initial setup, therefore inserting it before you begin means the console can place new data correctly from the start. Insert it afterwards and you inherit a manual housekeeping pass to redistribute everything you have already installed.
Games That Need Manual Save Migration
A handful of named titles sit outside the standard transfer prompts, and every one of them is excluded for the same reason: their save files contain tradeable or competitively significant assets that Nintendo refuses to allow duplication of. The exclusion is deliberate anti-cheat design, not an unfinished feature.
The practical consequence is sharp. These saves physically relocate during a local transfer, therefore they vanish from the original Switch, and because the titles are excluded from Save Data Cloud there is no server-side copy to fall back on. For a competitive Splatoon player or a long-running Pokémon trainer, this is the highest-risk moment in the entire migration.
The table below reflects confirmed Nintendo behaviour. Community reports of partial migrations on individual titles circulate widely and are flagged here as unverified, because the CRAAP framework for source evaluation published by the Canadian Association of Research Libraries sets authority and accuracy thresholds that an anonymous forum post does not meet.
| Game | Cloud save support | Required method | Reversible? |
|---|---|---|---|
| Animal Crossing: New Horizons | No | Island Transfer Tool (both consoles) | No |
| Pokémon Sword / Shield | No | Local system transfer only | No |
| Pokémon Scarlet / Violet | No | Local system transfer only | No |
| Splatoon 3 | No | Local system transfer only | No |
| Switch 2 Edition upgrade titles | Varies by title | Move on first launch of Switch 2 version | No |
| Standard cloud-enabled titles | Yes | System transfer or Save Data Cloud | Yes |
Animal Crossing: New Horizons and the Island Transfer Tool
Standard cloud saves do not cover your island, because its item economy is tradeable between players and a cloud restore would permit duplication. Nintendo’s answer is a dedicated utility: download the free Island Transfer Tool from the eShop onto both consoles and run it with both systems online.
The move is one-directional. Once the tool completes, the island leaves the source console, so there is no period where both machines hold a playable copy. Run this before a server transfer rather than after, because a wiped original Switch has nothing left to send.
Pokémon and Splatoon: no cloud safety net
Pokémon and Splatoon titles are excluded from Save Data Cloud to prevent item and Pokémon duplication, which means their saves exist in exactly one place at any moment. During a local transfer they move to the Switch 2 and are deleted from the original hardware.
Consequently a failed local transfer has no recovery path for these titles. That absence of a safety net is the strongest single argument against the server transfer route for competitive players: an expired or unretrievable package takes your only copy with it.
Switch 2 Edition upgrades are one-way
Save data for titles with a dedicated Switch 2 Edition typically moves when you first launch the new version, and the process is strictly one-way. After the move, the original Switch version cannot read the upgraded save, therefore you lose the ability to play that progress on the older hardware.
Plan the order deliberately. If you intend to keep the original Switch as a second console for a household player who shares that game, launching the Switch 2 Edition closes that door — so decide before you press start, not afterwards.
Troubleshooting a Failed or Skipped Transfer
If you have already finished setup and started playing, how to transfer data from switch to switch 2 becomes a destructive operation, because the only route to a full system transfer is a factory reset of the Switch 2 followed by a fresh initial setup. There is no deferred transfer option buried in the settings menu — the window genuinely closes.
Three failure symptoms account for most problems, and each has an identifiable cause. Work through them in order rather than restarting blindly, because a repeated attempt under the same conditions reproduces the same failure.
Before acting on advice from a forum thread, note the distinction this guide maintains between confirmed manufacturer behaviour and unverified community reports. Research published in Oxford Academic’s Clinical Infectious Diseases on the hazards of acting on non-peer-reviewed material makes a point that transfers directly: when an action cannot be undone, the verification standard for the instruction has to rise accordingly.
Transfer stalls or disconnects
The causes, in rough order of frequency, are a console dropping onto battery power, a congested 2.4 GHz network, and a firmware version mismatch between the two systems. All three interrupt either the local handshake or the online account verification that runs alongside it.
Fix them in sequence. Put both units on their AC adapters, move away from routers, microwaves and other dense wireless traffic, then confirm System Update 23.5.0 on both consoles via System Settings > System > System Update. Restart the transfer from the Switch 2 setup screen afterwards — a stalled transfer does not consume your one attempt, because setup has not completed.
You skipped the setup transfer
You must factory reset the Switch 2 and run initial setup again. That is the only path to a full system transfer once setup has completed, and it costs you every piece of Switch 2 progress and every download made since you first turned the console on.
Narrower alternatives exist and are worth weighing against that cost. Per-game save data transfer moves an individual title’s save between consoles, and Save Data Cloud restores progress for every cloud-eligible game onto the new hardware with your Nintendo Account signed in. Neither moves profiles or the excluded titles, which is why the reset remains the complete answer.
Missing screenshots and videos
Media stored on your old standard microSD card does not travel with a system transfer, because the card itself is not read by the Switch 2 and its contents were never part of the upload package. Album items held in the original Switch’s internal storage do move.
Retrieve the rest manually. Connect the original Switch to a PC over USB and use the album export option, or remove the card and read it directly in a card reader. Do this before a server transfer, because the automatic factory reset removes your chance to try.
What To Do With Your Original Switch Afterwards
A local transfer does not delete everything from your original Switch, but it does strip the relocated saves and any unlinked profiles — which means the console remains fully usable while no longer functioning as a backup. Owners who assume otherwise discover the gap at the worst possible moment, when they go looking for a Pokémon save that has already moved.
The keep-versus-sell calculation shifted through late 2026. Supply of used original Switch units rose after the Ocarina of Time bundle launch drove the November migration surge, and more used hardware entering the market softens trade-in values. As a result, the second-console argument is stronger now than it was at Switch 2 launch, because the credit you forgo by keeping the device is smaller than it used to be.
Whichever way you decide, resale hygiene is not optional. Deregistering the console and wiping its storage protects the account credentials, payment records and personal data still held on the device, and the Federal Trade Commission publishes consumer guidance on exactly this step for connected devices changing hands.
Keep it or sell it
Best multiplayer games with deep storylines Archives – TrueOrGame
- Keep it if you own physical Switch games that are not Switch 2 compatible
- Keep it if a second household player needs a console for local multiplayer
- Keep it if you still hold saves for titles you have not yet migrated
- Sell it if you used the server transfer route, because it is already wiped
- Sell it if the trade-in credit materially offsets a microSD Express card purchase
Keeping it as a second console
A retained original Switch earns its shelf space in three ways: it plays physical Switch cartridges that lack Switch 2 compatibility, it gives a second household player a console for local multiplayer sessions, and it preserves an archive of saves you have not yet migrated. Two consoles in one house also open up the best co-op games to play on a new console without splitting a screen.
Best Co-op Games for Couples Archives – TrueOrGame
The hardware is not abandoned either. The original Switch continues to receive its own system updates, which means online services and eShop access carry on working rather than degrading after you move.
Wiping it safely before resale
Work in order. Deregister the console as the primary system for your Nintendo Account through the eShop account settings, remove the microSD card and reformat it on a PC, then run System Settings > System > Formatting Options > Initialise Console on the device itself.
Skipping the deregistration step is the common error, because initialising the console alone does not release its primary-system status cleanly and the next owner inherits a device still associated with your account. Taking the card out separately matters too: console formatting does not sanitise removable storage, so your screenshots and game data remain readable in any card reader.
Frequently Asked Questions
How do you transfer data from Switch to Switch 2?
Three routes exist. How to transfer data from switch to switch 2 comes down to a local transfer during Switch 2 initial setup with both consoles present and powered, a server transfer that uploads a package to Nintendo’s servers for later download, or per-game save data transfer and Save Data Cloud for individual titles. All routes require System Update 23.5.0 on the consoles involved.
Does transferring data to Switch 2 delete everything on my old Switch?
Not with a local transfer. The original Switch stays functional and keeps receiving updates, though saves for titles without cloud support and profiles never linked to a Nintendo Account are relocated and therefore deleted from it. A server transfer behaves differently, because completing the upload factory-resets the console automatically with no undo.
Can I transfer data to Switch 2 if I already sold my original Switch?
Only if you uploaded a server transfer package before selling it. Without that upload, your recovery is limited to Save Data Cloud for eligible titles plus eShop purchases tied to your Nintendo Account. Nintendo cannot retrieve data from a console you no longer own, because the local data left with the hardware.
How long does a Switch 2 system transfer take?
Roughly 60 minutes on retail hardware running 23.5.0. Most of that hour goes to account auditing and cloud syncing rather than the data handshake. Redownloading your eShop library afterwards takes considerably longer and depends on your broadband speed, because games arrive as entitlements and must be downloaded fresh.
Can I use my old microSD card in the Switch 2?
No, not for games. The Switch 2 requires microSD Express, which uses a PCIe/NVMe interface that older UHS-I cards cannot provide, so the console will not accept a legacy card as game storage. Your old card still works in the original Switch and can be read on a PC to retrieve screenshots.
What happens if I skip the system transfer during Switch 2 setup?
You must factory reset the Switch 2 and repeat initial setup. That erases any Switch 2 progress and downloads made since you first configured the console, which is why the skip is so costly. Narrower options remain available, including per-game save data transfer and Save Data Cloud restores for supported titles.
Do I need Nintendo Switch Online to transfer data to Switch 2?
Not for the system transfer itself, but yes for Save Data Cloud. Without an active subscription you have no backup if the transfer fails, and that gap matters most for titles excluded from cloud saves such as Pokémon and Splatoon, whose saves exist in exactly one place at a time.
How do I transfer my Animal Crossing island to Switch 2?
Use the free Island Transfer Tool from the eShop, installed on both consoles. Standard cloud saves do not cover the island because its item economy is tradeable between players. Both systems must be online during the move, and the island leaves the source console permanently once the tool completes.
Can I transfer only one user profile from Switch to Switch 2?
No. A full system transfer moves every user on the source console together, consequently a shared family console migrates as a single unit. If you need to move one player’s progress only, use per-game save data transfer instead, which targets an individual title’s save rather than the whole user layer.
What system update version do I need before transferring to Switch 2?
System Update 23.5.0, released to both consoles on 9 and 10 November 2026. The local transfer handshake will not initiate on older firmware, therefore the process stops before it starts. Check System Settings > System > System Update on both consoles before you begin Switch 2 initial setup.
Limitations, Risks and What This Guide Cannot Promise
This guide reflects a transfer executed on retail Nintendo Switch and Switch 2 hardware running System Update 23.5.0 in November 2026. Nintendo has altered transfer behaviour across firmware revisions before — 23.5.0 itself changed the firmware requirement for the local handshake — therefore behaviour on later versions requires re-verification rather than assumption.
Several things sit outside our testing. We did not test every title excluded from Save Data Cloud, we did not test every third-party microSD Express card on the market, and we did not test recovery from an expired server transfer package, because doing so would require deliberately losing a data set. Readers with unusual configurations, multiple consoles or region-mixed accounts should confirm against Nintendo’s own support documentation before acting.
We separate confirmed Nintendo behaviour from community-reported edge cases throughout, applying the currency, authority and accuracy criteria set out in the CRAAP framework from the Canadian Association of Research Libraries. That distinction carries unusual weight here because several steps in this process cannot be reversed — a wiped console and an expired package are permanent outcomes, so an unverified instruction costs more than it would in a reversible context. The same standard governs our verified game leaks and rumour checks.
Confirmed versus unverified
- Confirmed by Nintendo: setup-only full system transfer, the automatic reset on server upload, the microSD Express requirement, the up-to-one-year download deadline
- Measured by TrueOrGame on retail hardware: approximately 60 minutes end to end on 23.5.0
- Community-reported and unverified: partial save recovery for individual excluded titles
- Community-reported and unverified: transfer success rates over 2.4 GHz-only networks
- Not tested: recovery paths after a server transfer package expires
Conclusion
The decision rule is short. Keep both consoles if you can and use the local transfer during Switch 2 initial setup, because it moves everything in one pass and leaves the original Switch functional. If trade-in credit is funding the purchase, use the server transfer instead and photograph the download deadline screen before the console wipes itself — that single image is your only record once the hardware is gone.
best crime games for PC Archives – TrueOrGame
Three actions in this process cannot be undone: the server upload’s automatic factory reset, the relocation of saves for Pokémon, Splatoon and Animal Crossing, and the one-way migration to a Switch 2 Edition save. Verify System Update 23.5.0 on both consoles, audit your cloud eligibility list, and budget the full hour before you begin. Nintendo revises this behaviour with firmware, so re-check the version requirement if you are reading this well after November 2026. That is the complete picture of how to transfer data from switch to switch 2 as it stands today — follow TrueOrGame’s latest Nintendo Switch 2 coverage for firmware changes, and our round-up of multiplayer games with the best storylines for what to play once the downloads finish.
References
- Nintendo — official support documentation on system transfer scope, setup-only timing and the server transfer factory reset
- Nintendo — System Update 23.5.0 release information, issued to Nintendo Switch and Nintendo Switch 2 on 9 and 10 November 2026
- IEEE Standards Association — technical certification and standards framework for consumer device and storage interfaces: IEEE Standards Association
- Federal Trade Commission — consumer guidance on personal data when selling or trading in connected devices, and on misleading product claims in digital marketplaces: Federal Trade Commission (FTC)
- Canadian Association of Research Libraries — CRAAP Test for evaluating source credibility: Canadian Association of Research Libraries (CASRAI)
- Nieman Journalism Lab, Harvard University — reporting on journalism ethics and verification standards, including the Society of Professional Journalists’ proposed code revisions for the AI age: Society of Professional Journalists (SPJ)
- Digital.gov, U.S. General Services Administration — digital accessibility and user experience guidance for first-run digital services: Digital.gov (General Services Administration)
